En Stock Last items in stock inicio Breathing hoses ballast (pair) (pre owned) Jdive00BH 59.99 € Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could... Add to cart
Fuera de Stock Ask us about availability BOVs Dive Soft DSV + MAVs, for... 907.50 € Dive Soft DSV + MAVs for any rebreather you will find at the dropdown menu Add to cart
Fuera de Stock Ask us about availability BOVs Dive Soft DSV for... 441.65 € DiveSoft DSV to use with any rebreather you will find at the dropdown menu Add to cart
Fuera de Stock Out-of-Stock O2 SENSORS Dive Soft R22D O2 sensor #3092 103.46 € Description Oxygen cell with diaphragm for use with rebreathers with Molex connection*New oxygen cell output can vary in range 7-13 mV (in Air at 25°C, sea level). Range 0-100% oxygen. Accuracy within +/- 1% of full scale at constant temperature and pressure. Minimize sensors storage periods, one year warranty. View
Fuera de Stock Ask us about availability BOVs Divesoft BOV + ADV for... 1,416.67 € CE approved Divesoft BOV for use any unit you will find at the dropdown menuSupplied together with two wide and two narrow clamping rings. Add to cart
Fuera de Stock -7% Ask us about availability BOVs DiveSoft BOV + MAVs + ADV, for... 1,406.63 € 1,512.50 € BOV with integrated ADV and Manual Addition Valves for use with any rebreather you will find at the dropdown menu Add to cart
Fuera de Stock Ask us about availability BOVs Divesoft BOV + MAVs for... 1,476.20 € Divesoft BOV with Manual Addition Valves for CCR Liberty. Add to cart
Fuera de Stock -7% Ask us about availability BOVs Divesoft BOV for... 928.37 € 998.25 € Description Divesoft BOV for use with any rebreather listed at the dropdown menuSupplied together with two clamping rings. CE approved to EN250:2014 Add to cart
En Stock Available Meg Dust Cap Set 9/16" (male & female) DS-2 50.49 € Female and male metal Dust Cap for the 9/16 "regulator hose connections Ideal for protecting the hose terminal, rebreather head inlet, BOV, etc ... Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
Fuera de Stock Out-of-Stock REGULATOR ACCESORIES Elbow 3/8" J.Dive-elbow2 29.99 € Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º View
En Stock Last items in stock REGULATOR ACCESORIES Extender for 3/8" connections 19.99 € 3/8" connection extender in two length options, 16 and 24mm (not counting the thread) Standard 3/8" connections. NOTE: the photo shows the 2 length options. The price includes only one unit. Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available Meg ISC heads calibration kit Calibration Kit J.Dive 89.99 € It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one... Add to cart
En Stock Available TANK LABELS J.Dive "DILUENT" Tank label j.divedil 2.99 € Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm Add to cart
En Stock Available TANK LABELS J.Dive "OXYGEN" tank label j.diveoxy 2.99 € Identification Oxygen Sticker for rebreather tanks, with high adhesion power. Dimensions: 184mm x 34mm Add to cart
Fuera de Stock Out-of-Stock Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. View
En Stock Available Cables and adapters JJ-CCR coaxial to to molex Cell adaptor J.DIVE-CTOM-160 19.36 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
Fuera de Stock Out-of-Stock REGULATOR ACCESORIES LP Hose Splitter 45º J.Dive-twin90 36.30 € Output multiplier made of stainless steel with one output oriented at 180º and another at 45º with respect to the input Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16-18 male inlet to two 3/8-24 female outlets Low pressure only Dimensions of the block: 23 x 23 x 15mm View
En Stock Last items in stock REGULATOR ACCESORIES LP Hose Splitter 90º J.Dive-twin90 36.30 € Output multiplier made of stainless steel with one output oriented at 180º and another at 90º with respect to the input Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16-18 male inlet to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm Add to cart
En Stock Last items in stock REGULATOR ACCESORIES Manifold 8 outputs J.Dive-manifold8 95.00 € Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr Add to cart