En Stock Last items in stock inicio Breathing hoses ballast (pair) (pre owned) Jdive00BH 59.99 € Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could... Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
Fuera de Stock Out-of-Stock REGULATOR ACCESORIES Elbow 3/8" J.Dive-elbow2 29.99 € Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º View
En Stock Last items in stock REGULATOR ACCESORIES Extender for 3/8" connections 19.99 € 3/8" connection extender in two length options, 16 and 24mm (not counting the thread) Standard 3/8" connections. NOTE: the photo shows the 2 length options. The price includes only one unit. Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available Meg ISC heads calibration kit Calibration Kit J.Dive 89.99 € It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one... Add to cart
Fuera de Stock New Ask us about availability JJ-CCR J-CCR Over pressure valve for 1st stage (17bar) 2010200038 35.09 € Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent Add to cart
En Stock Available TANK LABELS J.Dive "DILUENT" Tank label j.divedil 2.99 € Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm Add to cart
En Stock Available TANK LABELS J.Dive "OXYGEN" tank label j.diveoxy 2.99 € Identification Oxygen Sticker for rebreather tanks, with high adhesion power. Dimensions: 184mm x 34mm Add to cart
En Stock New Available JJ-CCR JJ-CCR 3-Way Manifold 4100-30 65.00 € 3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection) Add to cart
En Stock Available JJ-CCR JJ-CCR ADV diaphragm 2050-10 39.60 € ADV diaphragm spare part (JJ-CCR Rebreather) Add to cart
En Stock New Available JJ-CCR JJ-CCR ADV stud 3100-01 36.30 € Tracheas connector from breathing hoses to the ADV of the JJ-CCR rebreather Diameter of the insert in the ADV 37.5mm Bump thickness 2,3mm Add to cart
Fuera de Stock On Demand JJ-CCR JJ-CCR Axial Scrubber 3060-00 290.00 € Axial scrubber for JJ-CCR rebreather Capacity 2,3kg Autonomy 168´ Add to cart
En Stock Last items in stock JJ-CCR JJ-CCR breathing hose protectors 2300-10 29.79 € JJ-CCR breathing hose protectors (pair) Add to cart
En Stock Available Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
En Stock Available Cables and adapters JJ-CCR coaxial to to molex Cell adaptor J.DIVE-CTOM-160 19.36 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
Fuera de Stock New Ask us about availability JJ-CCR JJ-CCR Complete DSV 3100-00 587.00 € Full DSV including everything visible in the image Add to cart