En Stock Available valves BtS rebreather mono valve A16817611 67.00 € Rebreather mono valve G5/8 (DIN) 232Bar M25 thread (EN-144 FLAT) Clean in O2 service Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available valves Grifería en linea M26, BtS A16817612 67.00 € Valve with specific design for rebreather use, however si also perfect to use with any other use that requires this orientation. Connection M26 EU Nitrox 232bar Connection bottle neck 25x2 (EN-144 FLAT) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
En Stock Last items in stock valves Modular Valve Left side 232Bar A16310607 65.00 € O²CLEAN LEFT SIDE EXPANDABLE 232 BAR G5/8 MONO VALVE “Left side” 232 bar expandable mono valve, without blind plug 232 BAR G5/8 MONO VALVE “Left side” 232 bar expandable mono valve, without blind plug Do you need the blind plug? click here Add to cart
En Stock Available valves Modular valve Right 232Bar A16310608 65.00 € O²CLEAN RIGHT SIDE EXPANDABLE 232 BAR G5/8 MONO VALVE “Right side” 232 bar expandable mono valve, without blind plug Do you need the blind plug? click here Add to cart
En Stock Available inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins Add to cart
En Stock Available Cables and adapters Molex to Coax adaptor MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
En Stock Available valves Mono valve 232Bar A16310609 56.00 € Single output Valve non-expandable 232Bar 25x2 EN-144 FLAT G/58 Add to cart
Fuera de Stock Ask us about availability ADAPTERS Rotation Swivel Adapters 37.99 € Male and female 3/8" conetions And HP swivel 90º one conection Add to cart
En Stock Available O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
Fuera de Stock New Ask us about availability Steel Tanks Steel Tank 1,8 Liters 232Bar 144.99 € Volume: 1,8l Fill pressure: 230bar Neck Thread: M18x1,5 Diameter: 82,5mm Length: 455mm Weight: 2,8kg Add to cart
Fuera de Stock New Ask us about availability Steel Tanks Steel Tank 1,8 Liters 232Bar Black Color 168.00 € Volume: 1,8l Fill pressure: 230bar Neck Thread: M18x1,5 Diameter: 82,5mm Length: 455mm Weight: 2,8kg Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 2 liters Eurocylinders 161.00 € Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 3.8kg Diameter: 114mm Height: 305mm Neck: 25x2 EN-144 FLAT Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel Tank 3 liter 100mm Black Eurocylinders 158.99 € New 3 liters Steel tanks, perfect to change the look of your rebreather. Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 4.8kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT Add to cart
Fuera de Stock Ask us about availability TANKS & MORE... Steel tank 3 liters 100mm Eurocylinders 158.99 € 3 litre steel Euro cylinder Ideal for rebreather divers and pony bottles. Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 4.8kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT Add to cart