REGULATORS

Special regulators sets

AQUALUNG

APEKS

Scubapro

Mares

CRESSI

Dynamic Nord

TECLINE

HALCYON

Seac Sub

HOLLIS

ATOMIC AQUATICS

ScubaForce

OMS

DIVE RITE

FIRST STAGES

Stage/Bailout regulators

OCTOPUS

SECOND STAGES

Tel Sets

Pressure Gauges

REGULATOR ACCESORIES

Service kits and O-Rings

Spare parts

Tools and grease

Regulator bags

Gadgets

Smaco Systems

Boat Emergency Kits

Chemicals

En Stock

Available

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.12 €

Price per meter

En Stock

Available

Service kits and O-Rings

Complete O-Rings kit

jnt-box-0001

39.67 €

Complete kit with viton and standard O-Rings for: the neck of the tank, the HP nipples, for regulator hoses both terminals, for HP hoses, 2 sizes for regulator DIN connection, HP nipples, schrader valves for the inflator hose with its specific tool and 2 INT racors...

En Stock

Available

Tools

Inflator valve tool (medium model)

jdive0026

3.30 €

This product is a tool for the removal and adjustment of the schrader valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing. This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.Total tool length: 90mmHandle Length: 65mm

En Stock

Available

ADAPTERS

INT screw for Nitrox DIN valve

VLV-DIN-0002

4.12 €

Adapter from DIN to YOKE with standard thread G5/8" to convert standard valves with DIN 232 Bar connection to INT 232 Bar

En Stock

Available

Pressure Gauge

J.Dive Evo Line Pressure Gauge

130013/E

52.00 €

With a completely new design, EVO LINE is the third generation of SPG mini line gauge boots. Thanks to a special mold processing, the EVO LINE case is much softer and more comfortable, but at the same time has greater grip and greater impact resistance. The EVO LINE is very easy to read and its rounded profile highlights its ergonomic shape and enhances...

En Stock

Available

CONTROL INSTRUMENTS

J.Dive SPG (52mmø)

jdive0022

49.29 €

J.Dive pressure gauges are manufactured in Europe by Termoindustria, a leading manufacturer in the sector, offering the most reliable, accurate, and robust pressure gauges of their kind. Its tempered glass, the double welding, and the copper beryllium bourdon tube mechanism guarantee maximum durability and never go out of calibration even with hard...

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

J.Dive-twin90-1st

30.00 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

J.Dive-manifold8

78.51 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

En Stock

Available

Tools

Medium pressure gauge

ins-mid-0001

20.80 €

Pressure gauge to adjust the intermediate pressure of the first stages

En Stock

Available

CONTROL INSTRUMENTS

Metalsub Nitrox Pressure gauge with hose

INS-MAN-0003

49.58 €

Metalsub Oxygen compatible Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-10%

Available

CONTROL INSTRUMENTS

Metalsub TECH Gauge Tempered Glass.

INS-MAN-0100

48.79 € 54.21 €

This pressure gauge is intendeed-ideal for stage tanks, thanks its small size is perfect for this use. It has been reinforced at the front part with an extra metal cover and a highly resistant Tempered glass. This pressure gauge will resits the hardest use we can give it.

En Stock

Available

CONTROL INSTRUMENTS

Mini gauge Metalsub

INS-MIN-0001

19.00 €

Metalsub Pony Gauge with BAR and PSI scale, designed to be installed directly in the first stage, it has a 7/16 UNF thread, the standard pressure gauge thread.

En Stock

Available

REGULATOR ACCESORIES

Necklace

jdive0021

3.72 €

This necklace is used to hold the auxiliar second stage to our neck when we dive/used technical regulators configurationIt´s made of bungee (elastic cord)

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose

JNT-NBR-0003-pack

1.24 €

4 O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose 20 units

JNT-NBR-0003

3.30 €

20 units of O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 9/16" hose

JNT-NBR-0004-pack

1.24 €

4 O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16")

JNT-NBR-0005-pack

1.60 €

4 O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16") 20 units

JNT-NBR-0005

6.60 €

20 units of O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage)

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

O-Ring for YOKE core adapter

0.66 €

O-RIng for YOKE adapter core. There are three options available: item 1: outer diameter 15.65mm, inner diameter 11.15mm, thickness 2.25mm ø item 2: outer diameter 16.65mm, inner diameter 12.15mm, thickness 2.35mm ø item 3: outer diameter 17.0mm, inner diameter 12.6mm, thickness 2.35mm ø NOTE: the price is for 1 (one) o-ring NOTE: the core adapter...

En Stock

Available

Service kits and O-Rings

O-Rings for DIN regulator terminal

3.30 €

Pack of 4 O-Ring for the DIN terminal of the regulator. There are two measures: 17mm outer diameter (option 1) 15mm outer diameter (option 2) And in two materials, standard or Viton. Choose the appropriate one for your regulator in the drop-down menus

En Stock

Available

Spare Parts

O-Rings for the pressure gauge nipple

JNT-NBR-0600-pack

1.24 €

4 O-Rings for the pressure gauge nipple

En Stock

Available

Spare Parts

O-Rings for the pressure gauge nipple 200 units

JNT-NBR-0600

31.00 €

200 O-Rings for the pressure gauge nipple

En Stock

Available

Spare Parts

O-Rings for the pressure gauge nipple O2

JNT-VTN-0600-pack

2.02 €

4 O-Rings for the pressure gauge nipple Os compatible

En Stock

Available

Spare Parts

O-Rings for the pressure gauge nipple O2 200 units

JNT-VTN-0600

53.76 €

200 O-Rings for the pressure gauge nipple Os compatible

Showing 1-24 of 57 item(s)

Product added to wishlist