En Stock Available Accessories Harness cinch SF-HARS-R 2.54 € Standar 5cm wide harness cinch Price per meter Add to cart
En Stock Available Hollis Spare parts Hollis complete inflator system 82.95 € Complete inflation system for Hollis wings, consisting of elbow with female thread and gasket, trachea and inflator end. Available in three sizes: 33cm 41cm 48cm Choose the appropriate one from the drop-down menu Add to cart
Fuera de Stock New Ask us about availability Hollis Spare parts Hollis complete inflator system with valve 208.1061.016 82.95 € Complete inflator kit with drain valve inserted in the elbow, works with all Hollis wings. Consists in: inflator control 41cm trachea Elbow with drain valve (jacket type) Add to cart
Fuera de Stock -10% New Ask us about availability Hollis Wings Hollis DT 50 208.1254.052 427.46 € 474.95 € The DT 50 Wing features a 360 degree tapered profile for heavier cylinders, to increase lift towards the hips, promoting better horizontal trim in dive position while still allowing perfect surface floatation. The DT 50 is focused on the dedicated drysuit diver, with heavier cylinders in cold water. Tank slots included on both models, which allows the... Add to cart
Fuera de Stock -12% New Ask us about availability Hollis complete wings Hollis DT System 208.8001.050 668.76 € 759.95 € The DT System is minimal and simple, and designed for the rigorous demands of the discerning doubles diver. Made tough, it comes with all of the components for your backplate and wing kit in one, pre-assembled from the factory. The foundation for the DT system starts with our new stainless steel backplate 2.0, with geometry and material choices tailored... Add to cart
Fuera de Stock -10% New Ask us about availability Hollis Wings Hollis ST 22 208.1254.022 359.96 € 399.95 € The ST22 wing is the perfect choice for warm water divers or any diver who does not need add lead, always without reach too deep dives Tank slots and tank cradle are included, allowing you to connect your wing and backplate without the need for a single tank adapter plate. This reduces weight and unnecessary accessories while traveling. The two-piece... Add to cart
Fuera de Stock -10% New Ask us about availability Hollis Wings Hollis ST 35 208.1254.035 386.96 € 429.95 € The ST35 is an excellent go-anywhere wing with the added lift for local cold-water dives but the streamlined design for dive travel. Tank slots and tank cradle are included, allowing you to connect your wing and backplate without the need for a single tank adapter plate. This reduces weight and unnecessary accessories while traveling. The two-piece... Add to cart
Fuera de Stock -10% New Ask us about availability Hollis complete wings Hollis ST Elite System 800.96 € 889.96 € Similar to the baseline ST, the ST Elite brings together our most popular single tank components into a single system. However, instead of the solo harness, we added our luxurious and adjustable Elite 2 harness, yielding a result similar to what you’d expect from a full-featured BCD. So if you’re coming from the recreational world of single tank diving... Add to cart
Fuera de Stock -10% New Ask us about availability Hollis complete wings Hollis ST Elite Travel Sytem 764.96 € 849.95 € Similar to the baseline ST, the ST Elite brings together our most popular single tank components into a single system. However, instead of the solo harness, we added our luxurious and adjustable Elite 2 harness, yielding a result similar to what you’d expect from a full-featured BCD. So if you’re coming from the recreational world of single tank diving... Add to cart
Fuera de Stock -12% New Ask us about availability Hollis complete wings Hollis ST System 668.75 € 759.94 € We designed the ST System for minimalist-minded divers who prioritize streamlining their kit, for the ultimate in traditional simplicity. So if you’re concerned about unnecessary bulk and pieces of equipment failing, the ST eliminates those factors. The foundation for the ST system starts with our new backplate 2.0 with geometry and material choices... Add to cart
Fuera de Stock -12% New Ask us about availability Hollis complete wings Hollis ST Travel System 642.35 € 729.94 € We designed the ST System for minimalist-minded divers who prioritize streamlining their kit, for the ultimate in traditional simplicity. So if you’re concerned about unnecessary bulk and pieces of equipment failing, the ST eliminates those factors. The foundation for the ST system starts with our new backplate 2.0 with geometry and material choices... Add to cart
Fuera de Stock -17% Out-of-Stock Hollis Wings accessories Hollis, SMS WEIGHT PLATE 208.0042 66.36 € 79.95 € Weight system designed for the SMS100 and SMS75 sidemount harness makes a perfect accessory for those with additional weight requirements. The weight plate mounts to the rear of a single or dual kit via SS bookscrews included with each harness. Supports up to 18lbs of weight, 3lbs per pocket. View
En Stock Available Spare parts Rubber bands kit for harness cinch SFSCHW 8.00 € Kit consisting of 6 bands of bungee type fabric for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands Add to cart
Fuera de Stock Ask us about availability ScubaForce Scuba Force Black Devil LONG Backplate BPBDL 175.00 € It is the extra long version of the Black Devilf ScubaForce backplate. With the same characteristics as the original but longer, is especially suitable for especially high users and for the assembly of some rebreathers which needs this extra height, such as for example the Meg or the KISS Classic Its total height is 48cm Its weight, 2.9Kg Manufactured... Add to cart
Fuera de Stock Ask us about availability ScubaForce Scuba Force Black Devil LONG/HEAVY Backplate BPBD6 299.00 € It is the extra long and heavy version of the Black Devilf ScubaForce backplate. With the same characteristics as the original but longer and heavier, is especially suitable for especially high users who could need more fixed lead and for the assembly of some rebreathers which needs this extra height, such as for example the Meg or the KISS Classic Its... Add to cart
Fuera de Stock New Ask us about availability ScubaForce Scuba Force Black Devil Set Deluxe Grey SFBDSD-23 599.00 € One Size Fits All This is an ingenious system that has it all. The shoulder, abdominal and crotch straps offer extensive length adjustment so it can be easily adjusted from XS to XXL. Secured at multiple points the harness remains stable and secure. Add to cart
En Stock New Available ScubaForce Scuba Force Black Devil Set Deluxe Red SFBDSD-1 599.00 € One Size Fits All This is an ingenious system that has it all. The shoulder, abdominal and crotch straps offer extensive length adjustment so it can be easily adjusted from XS to XXL. Secured at multiple points the harness remains stable and secure. Add to cart
En Stock Available ScubaForce Scuba Force Black Devil Skeleton Backplate BPBD 149.00 € The ScubaForce Black Devil Skeleton Backplate combines design with a maximum of convenience. Its shape is directly inspired by high quality backpacks. Weight: 2,3 kg (5.07 lbs) Material: stainless steel 3 mm (0.12“), powder-coated. Lenght: 41cm (16.14") Add to cart
Fuera de Stock Ask us about availability ScubaForce Scuba Force Blade Backplate, aluminium SFSMBP-ALU 199.00 € Based on the proven shape of the SCUBA FORCE Black Devil Plates, we have created a sidemount plate that offers maximum freedom of movement and maximum stability due to its shape. Not just for sidemount CCR divers a perfect choice. The BLADE sidemount plate comes in black and red and in aluminum and high quality stainless steel. And here, too, German... Add to cart
Fuera de Stock Ask us about availability ScubaForce Scuba Force Blade Backplate, stainless steel 199.00 € Based on the proven shape of the SCUBA FORCE Black Devil Plates, we have created a sidemount plate that offers maximum freedom of movement and maximum stability due to its shape. Not just for sidemount CCR divers a perfect choice. The BLADE sidemount plate comes in black and red and in aluminum and high quality stainless steel. And here, too, German... Add to cart
En Stock Available Harness Scuba Force blade harness parts 15.00 € Parts to mount the Scuba Force Blade harness, or to mount your own harness...Made of high quality marine grade stainless steel.Choose the required parts from the drop-down menu (the top part or the bottom one) NOTE: the price corresponds to only one piece, top or bottom, the picture shows both for illustrative purposes Add to cart
Fuera de Stock Ask us about delivery time ScubaForce Scuba Force Camband Stainless Steel Buckle Type II SFAC612 39.00 € Add to cart
Fuera de Stock Ask us about availability ScubaForce Scuba Force SS standard Backplate BPSBD 129.00 € The ScubaForce Standard Steel Backplate has a material thickness of 3 mm (0.12") and a total weight of 2,3 kg (5.07 lbs). It is made of saltwater resistant, stainless steel. Optimal positioning of the double tanks using the combination of the 3 holes and the lower slot. Holes in regularly spaced intervals enable you to fix your Argon-Set or other... Add to cart