TANKS/VALVES

TWIN TANKS

ALU.TANKS

Steel Tanks

valves

Lola Valves

NAUTEC VALVES

SPARE PARTS & EXTRAS

COMPLEMENTS

TANK LABELS

En Stock

Available

SPARE PARTS & EXTRAS

Blind plug with purge DIN 232/300Bar

US-1239

42.35 €

Drain plug operated by a handwheel for greatly simplified operation. DIN G5/8" connection, 200-300 bar Especially suitable for placing on cylinders any charge where you want to ensure it isn't lost, whether due to faulty valves or an accidental opening of a valve during transport, handling, or storage. It is particularly recommended when storing cylinders...

En Stock

Available (48-72h)

Tools

Combi Inflator tool

DT-20

9.20 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

SPARE PARTS & EXTRAS

DIN Blind Plug

ACRT-05.macho

4.84 €

En Stock

Available

Lola Valves

Lola Flexible Manifold 200Bar HPI-L

HPI-L 200

158.72 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 200 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 200Bar

HPI-L service kit-200

19.42 €

Service Kit for Lola HPI-L 200Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 300Bar

HPI-L service kit-300

20.63 €

Service Kit for Lola HPI-L 300Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Manifold Service Kit 200Bar

T-SP service kit-200

16.41 €

En Stock

Available

Lola Valves

Lola Manifold Service Kit 300Bar

T-SP service kit-300

17.91 €

En Stock

Available

Lola Valves

Lola Manifold T-SP 300Bar

Valve connector T-SP 300bar

177.92 €

Connection DIN G5/8" 230Bar direct to valve The manifold does not have an insulating valve because you already have one in each side valve, in this way we are able to isolate and eliminate even more failures, such as those of the manifold O-Rings. It is also more robust than conventional manifols. Even more, this manifold allows the twins to be assembled...

En Stock

Available

Lola Valves

Lola Nitrox Valves Service Kit

V set II-Nitrox

38.72 €

Service Kit for Lola Nitrox T-SV and T-SVO valves

En Stock

Available

inicio

Lola QHK Tank holder

QHB Holder

55.28 €

Tank holder for use on the Lola Tank holder kit

En Stock

Available

TANKS & MORE...

Lola QHK Tank Holder Kit

193.48 €

The Lola tank holder kit is robust, safe and quick and easy to use. The ball and push button locking system makes opening and closing easy while keeping the system fixed without uncomfortable rattling. The profile of the support is only 13mm, making the tank (or whatever you fixed in...) fit very tightly to the base where we anchor the support. It is...

En Stock

Lola Valves

Lola T-SV 300 Air right valve

T-SV 300 R

169.00 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

En Stock

Available

Lola Valves

Lola Valve Hand Wheel KV

25.37 €

Valve Hand Wheel for Lola Valves. NOTE: the vale is not included.

En Stock

Available

Lola Valves

Lola Valve Seat

Seat TKV

15.40 €

Seta for Valves T-SV and T-SVO

En Stock

Available

Lola Valves

Lola Valve Shaft

Valve Shaft

19.08 €

Lola Valve Shaft

En Stock

Available

Lola Valves

Lola Valves Service Kit

V set II-Air

31.15 €

Service Kit for Lola T-SV and T-SVO valves for use with Aire, trimix and Nitrox up to 40%

En Stock

Available

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 200Bar

ZV 200

24.50 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV-T G5/8" 300 Bar DIN Plug

ZV-T 300

29.99 €

The ZV-T plug protects the valve from contamination and from gas leakage from the bottle during transport. To release the gas and unscrew the plug, you just turn the rotary wheel (there is no need of key). The plug can be easily unscrewed even when under pressure. You just screw in the plug (we recommend to briefly open and close the valve). We also offer...

En Stock

Available

REGULATOR ACCESORIES

Tank and Regulator Blind plug (DIN)

ACRT-05

7.50 €

Set of female and male plugs for the DIN of the regulator and the cylinder valve, G5/8" threads (DIN)

En Stock

-18%

Available

TANKS & MORE...

Tanks fixation

ACCB-20

73.07 € 89.10 €

Tanks fixation Perfect to attach any pony tank like the Argon tank or extra Oxygen tank, to another tank or to the rebreather canister side It´s Stainless Steel made

Fuera de Stock

On demand

TWIN TANKS

Lola 2x12 Twin Set

Lola2x12-round

1,381.00 €

Twin set 2x12 Concave base assembled with Lola valves, BtS tank bands and Eurocylinders tanks NOTE: the tanks band of the picture are not the ones from Lola.

Fuera de Stock

on demand

Lola Valves

Lola Flexible Manifold 300Bar HPI-L

HPI-L 300

158.72 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 300 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

Fuera de Stock

Ask us about availability

Lola Valves

Lola Manifold T-SP 200Bar

Valve connector T-SP-200Bar

177.92 €

Showing 1-24 of 42 item(s)

Product added to wishlist