Fuera de Stock Ask us about availability Tools and grease Digital IP Gauge NANIP 72.00 € The Inter-stage pressure checker is precision instrument in a tough housing for everyday use. Perfect for rebreather divers and technical divers to check their inter-stage pressure with a higher degree of accuracy. It is available with a calibration certificate if required. Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Out-of-Stock Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. View
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
En Stock Available inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins Add to cart
En Stock Available Cables and adapters Molex to Coax adaptor MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
En Stock Available O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 10 liters Faber TNK-232-0010 283.99 € Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 12,2 kg (+/-3%) Diameter: 171mm Height: 59,5cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 12 liters 232Bar Faber TNK-232-0012 305.99 € Faber steel tank of 12 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 15,9 kg (+/-3%) Diameter: 203mm Height: 55cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel Tank 15l 232Bar Faber 341.99 € Faber steel tank of 15 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Working pressure 232 Bar Empty weight (without boo and without valve): 17.4 kg Diameter: 203mm Height: 63cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 18 liters 232Bar Faber TNK-232-0018 373.49 € Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 21 kg (+/-3%) Diameter: 203mm Height: 71cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 5 liters 200Bar Faber TNK-200-0005 229.30 € Faber steel tank of 5 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 7,5 kg (+/-3%) Diameter: 140mm Height: 47cm Boot included Add to cart
Fuera de Stock New Ask us about availability Spare & Accessories SUEWX Video support with elastic band 71258 90.75 € Action-CAM holder, safe and durable. Can also accommodate larger cameras. Compatible with all DPV models, very easy to install without tools. The standard ¼” screw, floats and special holders for underwater lamps or illuminators are supplied. The inner surface of the strap is coated with non-slip material. Add to cart
Fuera de Stock Ask us about availability Scooters SUEX all purpose support 71144 217.80 € Action-CAM holder, safe and durable. Can also accommodate larger cameras. Compatible with all DPV models, very easy to install without tools. The standard ¼” screw, floats and special holders for underwater lamps or illuminators are supplied. The inner surface of the strap is coated with non-slip material. Add to cart
En Stock Available Scooters SUEX carry handle 71415 54.45 € Additional carrying handle made of semi-rigid tape, equipped with elastic rings for securing the bolt snap of the tow leash. Equipped with an adjustable stainless steel strap, it can be firmly secured to the body of the scooter. For XJ, XK, 7SEVEN... series Ø195. Add to cart
Fuera de Stock Ask us about availability Scooters Suex Cover for VRX, VRT 71850 78.65 € Elastic cover to be placed on the DPV body to protect the surface during transport Add to cart