En Stock Available Spare parts Complete elbow assembly A11918022 23.99 € Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear Add to cart
En Stock New Available Spare parts copy of Service Kit for X01 end Inflator DTD 3429 36.30 € Box with 10 services for the J01 end inflator used in DTD end inflators and in others brands... Picture could not match with the right kit... Add to cart
En Stock Available Spare parts Corrugated hose 340 mm DIR DTD 3421 24.20 € 340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end. Add to cart
En Stock Available Spare parts Corrugated universal hose (OMS) 20.30 € This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19") Add to cart
En Stock Available Spare parts Double Gasket A11918020 3.90 € This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm Add to cart
En Stock Available Spare parts DTD Corrugated hose 24.20 € Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone. Add to cart
En Stock Available Spare parts DTD Inflator - end-piece J01 DTD 3422 44.06 € The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must. Add to cart
En Stock Available Spare parts DTD knee joint with screwed fitting Inflator low profile DTD 3423 17.48 € DTD, inflator - knee joint with screwed fitting low profile Add to cart
Fuera de Stock Ask us about availability DTD DTD PA webbing 50 mm - 4 m DTD 2105 17.00 € Special-made, hard, very resistant strap for backplate with a grommet for a screw. Add to cart
En Stock Available DTD DTD Weight inner pocket DOWN-DROP 13.90 € This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block. Add to cart
En Stock Available Spare parts Elbow Assembly with OVP with cable 34.90 € Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm Add to cart
En Stock Available Spare parts Elbow O-Ring 0.90 € Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the... Add to cart
En Stock Available Spare parts Elbow OMS (newest version, universal) A11918023 5.70 € The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the... Add to cart
En Stock New Last items in stock Spare parts External screw outlet flange DTD 0000 6.05 € DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings Add to cart
En Stock Available Spare parts inflator - knee joint with screwed fitting DTD 3406 12.36 € DTD, inflator - knee joint with screwed fitting Add to cart
En Stock Available Spare parts inflator - safety valve 1,4 (OPV) DTD-3407 12.44 € DTD, inflator - safety valve 1,4 (OPV) Add to cart
En Stock Available Spare parts inflator - screw outlet flange DTD-3409 12.68 € DTD, inflator - screw outlet flange Male thread to place the inflator elbow and the overpressure valve. Includes what is displayed in the image The thread pitch where we will attack the outside of the overpressure valve or elbow of the inflator is 51mmø and works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings Add to cart
En Stock Available Spare parts Inner coupling A11918021 4.69 € Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. Add to cart
Fuera de Stock Ask us about availability Spare parts OMS Peformance Internal Bladder Mono wings 69.70 € Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu Add to cart
En Stock Available Spare parts OMS Complete Elbow Assembly + 2015 A11918016 11.99 € To use on wings manufactured after 2015 Add to cart
Fuera de Stock Ask us about availability Spare parts OMS complete wing inflator kit 82.50 € Completed airway (to use with OMS wings manufactured after 2015): elbow, corrugated hose , inflator and gasket 13", 16" oder 19" Länge Add to cart