inflation and exhaust valves

En Stock

Available

SI TECH

Sitech Weld nut

6.34 €

This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown, the price...

En Stock

Available

SI TECH

Sitech, Anti-friction washer

11016

2.44 €

Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves

En Stock

Available

SI TECH

Sitech, external rubber valve port

60805

9.12 €

External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento.

En Stock

Available

SI TECH

Sitech, external valve port 75mmø

60885

6.02 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

inflation and exhaust valves

Sitech, external valve port 85mmø

60895

5.21 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

SI TECH

Sitech, External Valve port with flange

60810

6.34 €

External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all...

En Stock

Available

SI TECH

Sitech, Internal Valve Port

SI-60852-cut

3.32 €

Internal valve port used in the installation of Sitech valves.

Fuera de Stock

-21%

Ask us about availability

inflation and exhaust valves

Apeks dump valve

TL113124

71.16 € 90.08 €

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Double Drysuit connector

214.88 €

Part of the complex heating system consisting of at least an undersuit, SANTI Thermovalve or SANTI Connector and an external battery. This configuration allows a diver to wear the undersuit under the drysuit without angers associated with internal batteries. Spec details Inlet valve connector with 12V battery integration function Inlet valve connector is...

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Drysuit connector

161.16 €

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Thermovalve 303

268.60 €

Designed as part of complex SANTI Heating System which consists of such items as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to use the heating system without any dangers of using the internal battery. Spec details Weight: 200 grams Drysuit inflation valve with integrated...

Fuera de Stock

Ask us about availability

Valves and cables...

Scuba Force Inflation valve Port for Apeks

SFXHD

158.82 €

Scuba Force X-Heat heating system has a POM tightening grommet with E/O Cord 18/2 SVO. It’s compatible with standard batteries and has kink & IP68 protection.

Fuera de Stock

Ask us about availability

Valves and cables...

Scuba Force inflation valve with E/O and X-Heat connections

SI905507

209.24 €

The Vega inlet valve is a versatile solution for cold water diving, with two rotating ports, an accessible inflator button, and a standard E/O cord on the outside and a connector for the X-Heat system on the inside.

Showing 25-37 of 37 item(s)