List of products by brand Jonas Dive

En Stock

Available (24-48h)

J.Dive Flex HQ

J.Dive Flex HQ Yellow inflator hose

17.00 €

We incorporate this new braid which offers better qualities in terms of elasticity.The J.Dive Flex hoses are assembled in our facilities following the most stringent quality controls. When assembling them ourselves, we are able offering hoses to any size you need, being able to select the measure that is really necessary.Connections standar: 3/8" male to...

En Stock

Available

J.Dive HQ rubber hoses

J.Dive HP Hoses +

Jonas Dive

22.90 €

High pressure hoses are without a doubt the piece of equipment that suffers the most. Both the pressure they are subjected to and the bends they are subjected to make them last less than LP hoses. These hoses are mounted on black rubber, which is very flexible and light, while also being very resistant. Their docility means that they can be bent, routed,...

En Stock

Available

J.Dive HQ rubber hoses

J.Dive LP Inflator Hose +

Jonas Dive

26.20 €

These LP inflator hoses are mounted in classic medium rubber with high abrasion resistance and a very good balance between hardness and malleability. High quality bushings are used, carefully assembled to give them the longest possible useful life. Standard connections 3/8" male to quick connection

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive LP Regulator Hoses +

Jonas Dive

21.00 €

These LP regulator hoses are mounted in classic medium rubber with high abrasion resistance and a very good balance between hardness and malleability. High quality bushings are used, carefully assembled to give them the longest possible useful life. Standard connections: 9/16" female and 3/8" male

En Stock

Available

Harness & Backplates

J.Dive sidemount harness

Jonas Dive

jdive0013

90.91 €

En Stock

Available

CONTROL INSTRUMENTS

J.Dive SPG (52mmø)

Jonas Dive

jdive0022

49.29 €

The white indexes on the black dial make the readability much clearer than on the classic white manometers. It also has a scale from 0 to 300, thus also achieving greater reading accuracy and a faster interpretation of the data. The numbers, indexes and needle are luminescent and highly legible in the dark after a few brief seconds of exposure to light.

En Stock

Available

J.Dive Systems

J.Dive SS backplate

Jonas Dive

jdive0001

117.15 €

New version of our Backplates with notable improvements in finishes.As always, compatible with all wings on the market, at least those known by us, "made in spain with proud" using 316L stainless steel.We dare to say that this new version is one of the best backplates currently available on the market. Customizable: Want to personalize your backplate?...

En Stock

Available

Accessories

J.DIVE STRAP FOR BACKPLATE

Jonas Dive

jdive0016

12.40 €

Harness webbing Harness webbing with a very balanced texture between rigidity and comfort. Stainless steel eyelet installed in the center. 3.5m long (do you need longer cinch? ask us about it) 50mm wide x 2.4mm thick

En Stock

Available

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

Jonas Dive

13.00 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

En Stock

Available

J.Dive HQ rubber hoses

JDIve inflators rubber hoses

Jonas Dive

16.00 €

Fuera de Stock

Out-of-Stock

Cables and adapters

JJ-CCR coaxial to to molex Cell adaptor

Jonas Dive

J.DIVE-CTOM-160

16.00 €

This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm.

View

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Ladder ring

Jonas Dive

80083

3.30 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration.

En Stock

REGULATOR ACCESORIES

LP Hose Splitter 90º

Jonas Dive

J.Dive-twin90

30.00 €

Output multiplier made of stainless steel with one output oriented at 180º and another at 90º with respect to the input Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16-18 male inlet to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

Jonas Dive

J.Dive-twin90-1st

30.00 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

Jonas Dive

J.Dive-manifold8

78.51 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

Manifold Gas Switch Block

Jonas Dive

J.Dive-block

202.48 €

Manifold block assy - Right Hand Oriented (2 gas input / 1 gas output) Solid brass construction for maximum durability Oxygen Compatible Materials and O-rings All connections are4 3/8" standard The M&J ENG Gas Switch Block allows a diver to change between two separate air tanks without having to remove their full face mask, BOV or whatever used......

View

En Stock

Available

TANK LABELS

MOD Identification stickers extra sticking power, Transparent background

Jonas Dive

1.23 €

MOD identification stickers with a very high adhesion power and abrasion resistance. The numbers of the sticker are black on a transparent background, making them able to use on white tanks. Are not recommended to use them on dark tanks Instructions for use: Lift the back layer and carefully choose the place to stick it (it is very difficult to peel it...

En Stock

Available

TANK LABELS

MOD Identification stickers extra sticking power, White background

Jonas Dive

1.23 €

MOD identification stickers with a very high adhesion power and abrasion resistance. The numbers of the sticker are black on a white background, making them able to use on any color tank. Instructions for use: Lift the back layer and carefully choose the place to stick it (it is very difficult to peel it off once stuck). Apply it from side to side making...

En Stock

Available

TANK LABELS

MOD OXY 6 Identification sticker extra sticking power, Transparent background

Jonas Dive

jdiveMOD-T-OXY

3.60 €

Oxygen 6m MOD identification sticker with a very high adhesion power and abrasion resistance. The numbers of the sticker are black on a transparent background, making them able to use on white tanks. Are not recommended to use them on dark tanks Instructions for use: Lift the back layer and carefully choose the place to stick it (it is very difficult to...

En Stock

Available

TANK LABELS

MOD OXY 6 Identification sticker extra sticking power, White background

Jonas Dive

jdiveMOD-B-OXY

3.60 €

Oxygen 6m MOD identification sticker with a very high adhesion power and abrasion resistance. The numbers of the sticker are black on a white background, making them able to use on any color tank. Instructions for use: Lift the back layer and carefully choose the place to stick it (it is very difficult to peel it off once stuck). Apply it from side to...

En Stock

Available

REGULATOR ACCESORIES

Necklace

Jonas Dive

jdive0021

3.72 €

This necklace is used to hold the auxiliar second stage to our neck when we dive/used technical regulators configurationIt´s made of bungee (elastic cord)

En Stock

Available

Gas fills, analysis & decanting

O-Ring 10x2mm used on G1/4" BSP male Threads

Jonas Dive

10X2MM-K

0.80 €

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

O-Ring for YOKE core adapter

Jonas Dive

0.66 €

O-RIng for YOKE adapter core. There are three options available: item 1: outer diameter 15.65mm, inner diameter 11.15mm, thickness 2.25mm ø item 2: outer diameter 16.65mm, inner diameter 12.15mm, thickness 2.35mm ø item 3: outer diameter 17.0mm, inner diameter 12.6mm, thickness 2.35mm ø NOTE: the price is for 1 (one) o-ring NOTE: the core adapter...

En Stock

Available

Service kits and O-Rings

O-Rings for DIN regulator terminal

Jonas Dive

3.30 €

Pack of 4 O-Ring for the DIN terminal of the regulator. There are two measures: 17mm outer diameter (option 1) 15mm outer diameter (option 2) And in two materials, standard or Viton. Choose the appropriate one for your regulator in the drop-down menus

Showing 49-72 of 106 item(s)