CONTROL TOTAL DE SU ENERGÍA
Con el software específico puede ver exactamente cuánto tiempo puede funcionar un sistema conectado con la potencia elegida. La salida E/O de Seacraft está dedicada especialmente a los sistemas de calefacción, por lo que creamos un sistema especial de regulación de voltaje de salida.
¿Cómo funciona?
En la marcha 0, mantenga presionados dos disparadores durante 3 s para activar el menú de la toma de corriente
Elija la potencia deseada o configúrela en OFF (APAGADA) utilizando los botones de marcha piezoeléctricos de Seacraft
Una pulsación breve de cualquier botón vuelve a la pantalla de conducción normal. Ahora puede conducir y utilizar el dispositivo alimentado por E/O simultáneamente.
Cambiar a la pantalla de monitoreo (pulsación breve de dos disparadores, en cualquier marcha) permite observar ahora cuál es el voltaje configurado de la toma de corriente y cuánta energía se extrae de la batería del DPV
TRACK YOUR OUTPUT
During the dive, you may choose between 5 levels of voltage output, tuned to correspond with 20 %, 40 %, 60 %, 80 % and 100 % heating power of 12 V systems. It corresponds with voltage steps of 6.0 V, 7.5 V, 9.4 V, 10,7 V, 12 V.
In case of using a lighting system- a 12 V output allows for connecting most of 14,4 V and 11,1 V light heads. The maximum power allowed from the output is 150 W.
SAFE HERMETIC CONNECTION
In order to improve overall safety, and even in case of cable failure, Seacraft decided to design and develop a hermetic charging port connector.
The new connector is waterproof – even without a closed charging socket cap – up to 11 bar (100 m), and secures the unit from the possibility of flooding by the operator’s inadvertence.
E/O cord adapter is connected there, with a compatible connector standard. When connected, the E/O cable adapter is waterproof up to more than 300 m depth.
COMPABILITY AND INSTALLATION
The power converter with E/O outlet may be purchased with the scooters in a dedicated set or installed separately for scooters that have been purchased without a power converter.
Seacraft power outlet requires an internal power converter to be installed in the electronic chamber. At the moment, this operation is performed only in the Seacraft factory and by authorized service points.
The power outlet can be added to Seacraft FUTURE and GHOST scooter which is model 2020 – which means, that its serial number is higher than #128.
These units’ electronic board was designed to allow for E/O outlet installation.
In order to have a power outlet in Your scooter, there are the following proceeding ways:
For new scooter ordering- notify your dealer that you would like to have an E/O outlet installed in the factory. It will be assembled- with an additional surcharge.
For upgrades of existing Seacraft scooters:
Check if your scooters S/N is higher than 128. Only scooters above #128 are possible to have E/O outlet installed.
Contact Seacraft, or your dealer.
In order to add a power outlet, you need to upgrade also your charging port, and charger connector- don’t forget to include a charger with DPV delivered for an upgrade.
As a hermetic charging port requires a shorter charging port cap- check if your cap has an original hole in it. This means that it will be compatible with the hermetic charging port. If not- a new one, or existing one modification is needed.
