En Stock Available Care & reparations Acelerador para cola de trajes, TRE PINI, 50ml tratt50 16.45 € Derived from the very reactive isocyanate compound diluted in ethyl acetate solvent.It acts as a crosslinker, increasing adhesion and temperature resistance of solvent-based adhesives.Usable for both polychloroprene adhesives and polyurethane adhesives. Add to cart
En Stock Available Tools Adjustable Pin Spanner DT-03-RW 15.00 € This pin spanner is made to fit regulators and 2 pin valve knobs.TOOL LENGTH: 115mm PIN DIA: 1.8mm PIN LENGTH :4MM Add to cart
En Stock Available SPARE PARTS & EXTRAS Blind plug with purge DIN 232/300Bar US-1239 35.00 € Drain plug operated by a handwheel for greatly simplified operation. DIN G5/8" connection, 200-300 bar Especially suitable for placing on cylinders any charge where you want to ensure it isn't lost, whether due to faulty valves or an accidental opening of a valve during transport, handling, or storage. It is particularly recommended when storing cylinders... Add to cart
En Stock Available 24-48h STEEL HARDWARE Book screw tool A11918097 1.65 € Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set Add to cart
En Stock -18% Available Spare parts-kits Boquilla Mares Jax Termomoldeables Boquilla Mares Jax 23.68 € 28.88 € The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling water for a few seconds and then clamp it between your teeth to... Add to cart
En Stock Available Accessories BtS Grip Pad 1.98 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. NOTE: The photo in gray shows the OMS logo, however, the correct logo is the BtS one. Add to cart
En Stock -40% Last items in stock Accessories Butt Plate Sidemout - XR Line 417510 39.17 € 65.29 € 1200D “bulletproof” Ballistic Nylon Polyphrene hydro-drainage comfort padding 4 holes along the bottom allow for the mounting on any harness as well as adding accessories Provide the proper amount of rigidity to hold tanks in position and eliminate sag Two stainless steel 316 marine grade handles used for tank attachment Add to cart
En Stock Available Accessories and spare parts Coltri Activated carbon 1L SC000350 29.00 € Activated Carbon to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands... Add to cart
En Stock Available Accessories and spare parts Coltri Breathing Air Filter Cartridge for MCH6 SC000340/ABS 38.00 € Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH6, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the cartridge... Add to cart
En Stock Available Accessories and spare parts Coltri Maxifilter SC000440/PP/CO-CATAL, EX 2026, Molecular Sieve, Activated Carb SC000440/PP 90.91 € Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH13/16, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the... Add to cart
En Stock Available Accessories and spare parts Coltri Molecular Sieve For Compressor 1L SC000380 20.66 € Molecular absorber (alumina), to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands... Add to cart
En Stock Available Accessories and spare parts Coltri Synthetic Oil ST755 1L SC000871 45.00 € COLTRI OIL ST 755 is a fully synthetic oil specifically developed for long lubrication durations of process gas compressors and especially for breathing air. It guarantees exceptional performance in all types of compressors. Add to cart
En Stock Available (48-72h) Tools Combi Inflator tool DT-20 7.60 € Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves Add to cart
En Stock Available Spare parts-kits copy of Mares 1st stage service kit 62X 46201836 32.23 € Maintenance kit for the first stages Mares 62X DIN and YOKE versionThe kit is complete, it contains all the O-rings, valve, diaphragm and its fixing washer, etc ... Add to cart
En Stock -21.83% New Available MARES copy of Mares Puck Lite Orange 414172BKWH 147.94 € 189.26 € The new Mares Puck Lite computer has been designed for simple and intuitive use. It has all the features that a recreational diver could need, including Nitrox up to 50% It also has Bluetooth connectivity which will facilitate the downloading of the dive log for those users who like to study the profiles and/or share them online with their buddies. Add to cart
En Stock Available Spare parts Corrugated universal hose (OMS) 15.21 € This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19") Add to cart
En Stock Available inicio Cover for Book Screw nut flat A11818019 0.80 € Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes Add to cart
En Stock -20% Available STEEL HARDWARE D-Rings Bent SS316 Mares XR Line 417526-uni 2.61 € 3.26 € Mares D-Ring Bent Stainless Steel 316 Add to cart
En Stock Available Hardware D-Rings FLAT SS316 Mares XR Line 417525 3.26 € Mares D-RIng Flat 50mm wide Add to cart
En Stock Available Spare parts Double Gasket A11918020 2.89 € This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm Add to cart
En Stock Available Spare parts Elbow Assembly with OVP with cable 28.10 € Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm Add to cart