DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

-16%

Available

COMPLEMENTS

4,2Kg, P-Weight

A21299905

86.78 € 103.31 €

P-Weights are directly screwed in the groove of the backplate and provide a perfectly centers weighting very close to the body. Weight 4,2kg Coated

En Stock

Acelerador para cola de trajes, TRE PINI, 50ml

Available

Care & reparations

Acelerador para cola de trajes, TRE PINI, 50ml

tratt50

16.45 €

Derived from the very reactive isocyanate compound diluted in ethyl acetate solvent.It acts as a crosslinker, increasing adhesion and temperature resistance of solvent-based adhesives.Usable for both polychloroprene adhesives and polyurethane adhesives.

En Stock

Available

Tools

Adjustable Pin Spanner

DT-03-RW

15.00 €

This pin spanner is made to fit regulators and 2 pin valve knobs.TOOL LENGTH: 115mm PIN DIA: 1.8mm PIN LENGTH :4MM

En Stock

Available

Harness & Backplates

Argon straps attached to tanks

A16918104

48.93 €

En Stock

Available

SPARE PARTS & EXTRAS

Blanking plug with pressure release button 300

#8140

96.70 €

Blanking plug with pressure release button 300 bar, G5/8".

En Stock

Available

REGULATOR ACCESORIES

Blind Plug UNF 1/2" incl. o-Ring for 1st stage

A13910607

6.61 €

UNF 1/2" blind plug for LP outlet of 1st stage regulator. Some older Mares and Apeks 1st stages had an LP output with that thread pitch, it was/is the output intended for the main 2nd stage.

En Stock

Available

SPARE PARTS & EXTRAS

Blind plug with purge DIN 232/300Bar

US-1239

35.00 €

Drain plug operated by a handwheel for greatly simplified operation. DIN G5/8" connection, 200-300 bar Especially suitable for placing on cylinders any charge where you want to ensure it isn't lost, whether due to faulty valves or an accidental opening of a valve during transport, handling, or storage. It is particularly recommended when storing cylinders...

En Stock

SPARE PARTS & EXTRAS

Blind plug with purge G5/8, 232/300Bar

accg-09

22.15 €

Blind plug with purge G5/8, 232/300Bar

En Stock

Available

valves

Bling plug for modular valve

7.44 €

Bling pugs Options: 1-left valve bling plug 2-right valve bling plug

En Stock

Available

SPARE PARTS & EXTRAS

Bolt (piece) - for twin tank bands

6.12 €

Stainless steel studs and metric 8 thread for twin tank bands. Available in 4 sizes (price is for 1 unit) Choose the appropriate one from the drop-down menu based on the relationship below: item nº1: For 140mm bands (2x7 twin tank), length 115.5mm item nº2: For 171mm bands (2x12 twin tank), length 136mm item nº3: For 186mm bands (2 x S080 twin tank),...

En Stock

CONTROL INSTRUMENTS

Bts compass, mounted with bungee

A14115810

50.41 €

BtS Compass with bungee arm mount.The arm mount makes it easy to create positioning of the compass.

En Stock

Available

Knifes & Cutters

BtS Explorer and Cave knife

A24419901

52.07 €

BtS Explorations cave Knife indispensable tool for diver rescue, cutting line, monofilament and fishing net Blade crucible stainless steel,Handle: Micarta Cloth Resin, Blade: crucible stainless steel, Handle: Micarta Cloth Resin, Total Length: 150 mm Length of Blade: 48 mm Thickness of Handle: 24 mm

En Stock

Available

DRYSUIT INFLATOR SYSTEMS

BtS Mounting Strap Set

52.81 €

Set of two mounting straps for drysuit inflation cylinders. Available in two sizes to fit cylinder diameters 90mm or 115mm or less. NOTE: The pads could be either blue or grey.

En Stock

Available

CONTROL INSTRUMENTS

BtS Pressure Gauge (SPG) 52mm

A14115803

53.72 €

BtS GAUGE Clean for O2 gauge 52mm diameter Hardened mineral crystal Sphere luminescent Finished nickel

En Stock

Available

CONTROL INSTRUMENTS

BtS Pressure Gauge (SPG) 63mm

A14115804

50.41 €

GAUGE BtS Clean for O2 gauge 52mm diameter Hardened mineral crystal Sphere luminescent Finished nickel

En Stock

Available

BUNGEE MOUNTS/COMPASS

Bungee Mount for Scubapro / Uwatec...

A14917304

23.14 €

Gauge mounts for wrist (ready with bungees) for Uwatec Aladin Prime, Tech 2G, Uwatec/Scubapro Digital Bottom timer

En Stock

Available

Accessories and spare parts

Coltri Activated carbon 1L

SC000350

29.00 €

Activated Carbon to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands...

En Stock

Available

Accessories and spare parts

Coltri Breathing Air Filter Cartridge for MCH6

SC000340/ABS

38.00 €

Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH6, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the cartridge...

En Stock

Available

Accessories and spare parts

Coltri Maxifilter SC000440/PP/CO-CATAL, EX 2026, Molecular Sieve, Activated Carb

SC000440/PP

90.91 €

Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH13/16, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the...

En Stock

Available

Accessories and spare parts

Coltri Molecular Sieve For Compressor 1L

SC000380

20.66 €

Molecular absorber (alumina), to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands...

En Stock

Available

Accessories and spare parts

Coltri Synthetic Oil ST755 1L

SC000871

45.00 €

COLTRI OIL ST 755 is a fully synthetic oil specifically developed for long lubrication durations of process gas compressors and especially for breathing air. It guarantees exceptional performance in all types of compressors.

En Stock

Available (48-72h)

Tools

Combi Inflator tool

DT-20

7.60 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

DRYSUIT INFLATOR SYSTEMS

Complete drysuit inflation system DIN

226.45 €

COMPLETE DRY SUIT INFLATION SYSTEMS, ALU OR STEEL CYLINDERS - 0,85 TO 3 LITRES. Drysuit Inflation Systems developed by BtS consisting of a Cylinder (aluminium or steel), Cylinder Valve (DIN), First Stage, and Cylinder Mounting Straps.

En Stock

Available

valves

Comptec Valves

64.46 €

Comptec type valves 5 different valves for the different models of dry suit inflation system tanks. Inert Gas valve for tanks with M18/1.5 neck Inert Gas valve for tanks with M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M18/1.5 neck and M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M25x2 neck 5/8 GAS valve (DIN 300Bar) for tanks with...

Showing 1-24 of 341 item(s)

Product added to wishlist