En Stock Available ADAPTERS 2nd Stage Quick Connect-Disconnect system SF2LADAP INFL 45.00 € 9/16" female adapter (second stage inlet) to standard jacket quick connect Add to cart
En Stock Available REGULATOR ACCESORIES 9/16 male to 3/8 female SFAD02 6.50 € 9/16" male to 3/8" female Add to cart
En Stock Available Care & reparations Acelerador para cola de trajes, TRE PINI, 50ml tratt50 19.90 € Derived from the very reactive isocyanate compound diluted in ethyl acetate solvent.It acts as a crosslinker, increasing adhesion and temperature resistance of solvent-based adhesives.Usable for both polychloroprene adhesives and polyurethane adhesives. Add to cart
En Stock Available ADAPTERS Adaptador NEVOC 30 para HELIO (gas inerte) 300Bar 1130 99.00 € 300Bar Inert Gas Adapter (Helium, Nitrogen, Argon ...) Connection type is W30 X 2 NEVOC to ISO 5145 (G1 4 ") Add to cart
En Stock Available REGULATOR ACCESORIES Adapter 1/2" a 3/8" SFAD04 6.50 € Adapter 1/2" a 3/8" male 1/2" to female 3/8" Add to cart
En Stock Available ADAPTERS Adapter 3/8" female to 9/16" female DT331A 45.00 € Female-female adapter 3/8" to 9/16" The photo shows both sides of the adapter for illustrative purposes only but ONLY one unit is included in the price. Add to cart
En Stock Available Tools Adjustable Pin Spanner DT-03-RW 19.00 € This pin spanner is made to fit regulators and 2 pin valve knobs.TOOL LENGTH: 115mm PIN DIA: 1.8mm PIN LENGTH :4MM Add to cart
Fuera de Stock Out-of-Stock SPARE PARTS & EXTRAS Blind plug with purge G5/8, 232/300Bar accg-09 28.36 € Blind plug with purge G5/8, 232/300Bar View
En Stock Available STEEL HARDWARE Bolt snap, stainless steel 6.20 € Four sizes available: S: 64 mm length 16 mm ø approx. for the Eye and 11mm ø for the end ring M: 80 mm length 18 mm ø approx. for the Eye and 16mm ø for the end ring L: 92mm length 21 mm ø approx. for the Eye and 19mm ø for the end ring XL: 117 mm length 18 mm ø approx. for the Eye and 34mm ø for the end ring Add to cart
En Stock Available STEEL HARDWARE Boltsnap, coldwater boltsnap,stainless steel, 120mm bs120 9.99 € Boltsnaps, the fixing solution in technical diving. Whether to attach the primary regulator, the lamp, the backup lamp or the pressure gauge - always this carabiner is used for. The size is the way specified in the length and diameter of the eye. This boltsnap is perfect for cold water conditions. Stainless steell Length ca. 120 mm Diameter Eye ca. 33 mm Add to cart
En Stock Available Accessories BtS Grip Pad 2.50 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. NOTE: The photo in gray shows the OMS logo, however, the correct logo is the BtS one. Add to cart
Fuera de Stock New Ask us about availability Swimming Neoprene Accessories Buddyswim Capucha Neopreno Trilaminate Warmth 2.5mm 45.90 € Specifically designed for open water swimming, it is very suitable for use in Scuba diving in temperate to warm waters. The Buddyswim neoprene swim hood is designed to keep your head and neck warm during open water swim sessions. Made with 2.5mm Trilaminate Warmth, a three-layer neoprene composition developed by Buddyswim to offer optimal protection and... Add to cart
Fuera de Stock New Ask us about availability Swimming Neoprene Accessories Buddyswim Capucha Neopreno Trilaminate Warmth 2.5mm Orange 45.90 € Specifically designed for open water swimming, it is very suitable for use in Scuba diving in temperate to warm waters. The Buddyswim neoprene swim hood is designed to keep your head and neck warm during open water swim sessions. Made with 2.5mm Trilaminate Warmth, a three-layer neoprene composition developed by Buddyswim to offer optimal protection and... Add to cart
Fuera de Stock New Ask us about availability Swimming Neoprene Accessories Buddyswim Chaleco Neopreno Trilaminate Warmth 1.5mm 65.90 € The Buddyswim Neoprene Swim Vest is designed to keep your body warm during open water sessions. Made with 1.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. Designed to go under the wetsuit and provide maximum upper body thermal protection in colder water swimming... Add to cart
Fuera de Stock New Ask us about availability Swimming Neoprene Accessories Buddyswim Neoprene Socks Trilaminate Warmth 2.5mm 36.91 € NEOPRENE SOCKS FOR OPEN WATER SWIMMING The Buddyswim neoprene swim socks are designed to keep your feet warm during open water sessions. Made with 2.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. The heat-sealed and vulcanized seams together with the SRC System... Add to cart
Fuera de Stock Ask us about availability inicio Buddyswim Neoprene Trilaminate Warmth 2.5mm Gloves 38.90 € Buddyswimm gloves are suitable for both swimming and diving. Designed to keep your hands warm during cold water open water swimming sessions and during our warm water dives. Made with 2.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. The heat-sealed and vulcanized... Add to cart
Fuera de Stock Out-of-Stock Swimming Buoys BuddySwim Smartphone Waterproof Case 250890 5.90 € The Buddyswim Smartphone waterproof Case making it a must for those who practice water sports. Avoid possible condensation problems inside buoys and waterproof backpacks.All the functions of the Smartphone can be accessed without having to remove it from the case and it is suitable for all sizes of mobile phones. View
En Stock Available (48-72h) Spare parts Combi Inflator tool DT-20 9.99 € Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves Add to cart
En Stock Available Spare parts Complete elbow assembly A11918022 23.99 € Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear Add to cart
En Stock Available Spare parts Corrugated universal hose (OMS) 20.30 € This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19") Add to cart