DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Acelerador para cola de trajes, TRE PINI, 50ml

Available

Care & reparations

Acelerador para cola de trajes, TRE PINI, 50ml

tratt50

19.90 €

Derived from the very reactive isocyanate compound diluted in ethyl acetate solvent.It acts as a crosslinker, increasing adhesion and temperature resistance of solvent-based adhesives.Usable for both polychloroprene adhesives and polyurethane adhesives.

En Stock

Available

Tools

Adjustable Pin Spanner

DT-03-RW

18.15 €

This pin spanner is made to fit regulators and 2 pin valve knobs.TOOL LENGTH: 115mm PIN DIA: 1.8mm PIN LENGTH :4MM

En Stock

Available

SPARE PARTS & EXTRAS

Blind plug with purge DIN 232/300Bar

US-1239

42.35 €

Drain plug operated by a handwheel for greatly simplified operation. DIN G5/8" connection, 200-300 bar Especially suitable for placing on cylinders any charge where you want to ensure it isn't lost, whether due to faulty valves or an accidental opening of a valve during transport, handling, or storage. It is particularly recommended when storing cylinders...

En Stock

SPARE PARTS & EXTRAS

Blind plug with purge G5/8, 232/300Bar

accg-09

26.80 €

Blind plug with purge G5/8, 232/300Bar

En Stock

-18%

Available

Spare parts-kits

Boquilla Mares Jax Termomoldeables

Boquilla Mares Jax

28.65 € 34.94 €

The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling water for a few seconds and then clamp it between your teeth to...

En Stock

-40%

Accessories

Butt Plate Sidemout - XR Line

417510

47.40 € 79.00 €

1200D “bulletproof” Ballistic Nylon Polyphrene hydro-drainage comfort padding 4 holes along the bottom allow for the mounting on any harness as well as adding accessories Provide the proper amount of rigidity to hold tanks in position and eliminate sag Two stainless steel 316 marine grade handles used for tank attachment

En Stock

Available

Accessories and spare parts

Coltri Activated carbon 1L

SC000350

35.09 €

Activated Carbon to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands...

En Stock

Available

Accessories and spare parts

Coltri Breathing Air Filter Cartridge for MCH6

SC000340/ABS

45.98 €

Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH6, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the cartridge...

En Stock

Available

Accessories and spare parts

Coltri Maxifilter SC000440/PP/CO-CATAL, EX 2026, Molecular Sieve, Activated Carb

SC000440/PP

110.00 €

Molecular sieve, CO catalyst, and activated carbon in a disposable cartridge filter. Removes moisture, hydrocarbon, carbon monoxide, carbon dioxide, particles, oil and taste/odor. Suggested for breathing air. Designed for Nuvair3-3.5, Coltri MCH13/16, American Airworks Fast 35, Max-Air 35 and Nautica compressors, and Personal Air Filters. NOTE: the...

En Stock

Available

Accessories and spare parts

Coltri Molecular Sieve For Compressor 1L

SC000380

25.00 €

Molecular absorber (alumina), to fill the air purifying filter of the cartridge used in the MCH13-16-36 compressors and many other brands...

En Stock

Available

Accessories and spare parts

Coltri Synthetic Oil ST755 1L

SC000871

54.45 €

COLTRI OIL ST 755 is a fully synthetic oil specifically developed for long lubrication durations of process gas compressors and especially for breathing air. It guarantees exceptional performance in all types of compressors.

En Stock

Available (48-72h)

Tools

Combi Inflator tool

DT-20

9.20 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Mares 1st stage service kit 82X/75XR/72X

Available

Spare parts-kits

copy of Mares 1st stage service kit 62X

46201836

39.00 €

Maintenance kit for the first stages Mares 62X DIN and YOKE versionThe kit is complete, it contains all the O-rings, valve, diaphragm and its fixing washer, etc ...

En Stock

-21.83%
New

Available

MARES

copy of Mares Puck Lite Orange

414172BKWH

179.01 € 229.00 €

The new Mares Puck Lite computer has been designed for simple and intuitive use. It has all the features that a recreational diver could need, including Nitrox up to 50% It also has Bluetooth connectivity which will facilitate the downloading of the dive log for those users who like to study the profiles and/or share them online with their buddies.

En Stock

-20%

Available

STEEL HARDWARE

D-Rings Bent SS316 Mares XR Line

417526-uni

3.16 € 3.94 €

Mares D-Ring Bent Stainless Steel 316

En Stock

Available

Hardware

D-Rings FLAT SS316 Mares XR Line

417525

3.94 €

Mares D-RIng Flat 50mm wide

En Stock

Available

SPARE PARTS & EXTRAS

DIN Blind Plug

ACRT-05.macho

4.84 €

En Stock

Miscellaneous

Extensible clip with swivel

Cordon extensible

15.35 €

Extensible clip with swivel snap hook and stainless steel ring.On one end includes a steel key ring in order to set and hold onto surface; the other includes a plastic carabiner to hold to a BD ring or another part of the diving gear. With its easy extension, it allows diver to use cameras, lighst or other accessories without having to let go.Available...

En Stock

Available

inicio

Fins holders straps (pair)

6.20 €

En Stock

Available

TANKS & MORE...

Inox clamp with internal protection

11.98 €

Available in 5 sizes: For tanks up to 127 mmø (100 to 127mm) For tanks up to 152 mmø (127 to 152mm) For tanks up to 178 mmø (152 to 178mm) For tanks up to 203 mmø (178 to 203mm) For tanks up to 216 mmø (203 to 216mm) The protection come mounted to use the clamps in the described measurement ranges, however, the protection can be cut easily making the...

En Stock

Available

Accessories

IST Handle for Backplates

ACCJ-22

13.39 €

IST Handle for Backplates

En Stock

ACCESSORIES

IST Pocket shorts

51.59 €

MADE FOR DIVING — Constructed of 3mm neoprene material. MAXIMUM STORAGE — Double holster design provides plenty of space for gear. DURABLE ZIPPERS — Heavy-duty plastic zippers are strong & secure. SNUG FIT — Velcro thigh straps secure to your legs for convenient carry of equipment. CARABINER LOOPS — Features 2 interior loops & 2 exterior loops...

Fuera de Stock

Ask us about availability

Accessories & spare parts

IST ProEar replacement ear frame transparent

5.76 €

Replacement of the frame of the earmuffs of the IST / Dolphin Pro Ear mask. Item nº1: right Item nº2: left

En Stock

Available

IST

IST TECH BCD WEIGHT POUCH

Tec. JP-WP-5

29.74 €

Showing 1-24 of 610 item(s)

Product added to wishlist