En Stock Available Care & reparations Acelerador para cola de trajes, TRE PINI, 50ml tratt50 16.45 € Derived from the very reactive isocyanate compound diluted in ethyl acetate solvent.It acts as a crosslinker, increasing adhesion and temperature resistance of solvent-based adhesives.Usable for both polychloroprene adhesives and polyurethane adhesives. Add to cart
En Stock Available Tools Adjustable Pin Spanner DT-03-RW 15.00 € This pin spanner is made to fit regulators and 2 pin valve knobs.TOOL LENGTH: 115mm PIN DIA: 1.8mm PIN LENGTH :4MM Add to cart
En Stock New Available SPARE PARTS & EXTRAS Blind plug with purge DIN 232/300Bar US-1239 35.00 € Drain plug operated by a handwheel for greatly simplified operation. DIN G5/8" connection, 200-300 bar Especially suitable for placing on cylinders any charge where you want to ensure it isn't lost, whether due to faulty valves or an accidental opening of a valve during transport, handling, or storage. It is particularly recommended when storing cylinders... Add to cart
En Stock Last items in stock SPARE PARTS & EXTRAS Blind plug with purge G5/8, 232/300Bar accg-09 22.15 € Blind plug with purge G5/8, 232/300Bar Add to cart
Fuera de Stock Product available with different options STEEL HARDWARE Bolt Snap Stainless Steel 316L 6.60 € 316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. 4 sizes available: 90mm: 21mm x 11mm eye and 20mm x 15mm ring 100mm: 21mm x 11mm eye and 23mm x 21mm ring 110mm: 21mm x 11mm eye and 37mm x 34mm ring Choose the desired size from the drop-down menu View
En Stock Available STEEL HARDWARE Bolt Snap Technical, Stainless Steel 316L 11.07 € 316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. Its large anti-snag trigger allows us to use them with any type of gloves or without them, comfortably and precisely. The eye design makes them quick to clip. The three options have the same body size, differing... Add to cart
En Stock Last items in stock inicio Breathing hoses ballast (pair) (pre owned) Jdive00BH 49.58 € Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could... Add to cart
En Stock Available BUNGEE MOUNTS/COMPASS BUNGEE in 4, 5, 6 and 8mm 1.12 € Price per meter Add to cart
En Stock Available inicio Canister fixing system jdive0032 18.10 € The system is provided with a strap with a stainless steel eyelet and screws to attach it to the backplate and the additional stainless steel buckle. Add to cart
En Stock Available Accesories / Weight Cobra weight Belt jdive0025 23.97 € Ballast belt mounted with the Cobra GT closure of Scuba Force and a soft strap to be able to mount and disassemble the leads in seconds and also be able to easily tighten and loosen the belt. NOTE: the leads are not included Add to cart
En Stock Available (48-72h) Tools Combi Inflator tool DT-20 7.60 € Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves Add to cart
En Stock Available J.Dive Flex HQ copy of J.Dive Flex HQ hose, LP Regulator Orange 16.40 € J.Dive Flex HQ regulator hoses We incorporate this new braid which offers better qualities in terms of elasticity.The J.Dive Flex hoses are assembled in our facilities following the most stringent quality controls. When assembling them ourselves, we are able offering hoses to any size you need, being able to select the measure that is really... Add to cart
En Stock Available Chargers, batteries and cables Doble charger for 18650 Li-ion batteries 2x1850-charge 10.33 € Add to cart
En Stock Available ACCESSORIES Dynamic Nord Cargo Short 82.64 € These shorts are designed with two large pockets and can be worn over a wetsuit, a semi-dry, or drysuit. They can also be used as swim shorts in warm water. They are made of 2 mm neoprene mixed with elastic Nylon material. They have two large pockets with bungee straps, flaps, and Velcro for a secure fastening. The waist is adjusted using a Nylon belt... Add to cart
En Stock Available Spare parts Elbow universal A11918023-uni 4.29 € Universal elbow suitable for a multitude of brands such as: Halcyon Dive Rite Hollis Tecline OMS Contact us if you have questions about compatibility with your wing Add to cart
En Stock Last items in stock Miscellaneous Extensible clip with swivel Cordon extensible 12.69 € Extensible clip with swivel snap hook and stainless steel ring.On one end includes a steel key ring in order to set and hold onto surface; the other includes a plastic carabiner to hold to a BD ring or another part of the diving gear. With its easy extension, it allows diver to use cameras, lighst or other accessories without having to let go.Available... Add to cart
En Stock -15% Available Gloves Fourth Element 3mm Neoprene Gloves 52.68 € 61.98 € Maximise thermal protection and dexterity with outstanding flexibility in this 3mm glove. Reshaped for 2021, the fit is improved with enhanced stretch across the back of the hand, whilst ensuring minimum water ingress thanks to fused seams. The longer length cuff can be trimmed to the wearer’s preferred length thanks to reinforced bar tacks in the wrist... Add to cart
En Stock Available Dry Suit Boots Fourth element AMPHIBIAN BOOTS 99.17 € The most comfortable diving boots on the market. Warm, featuring an ergonomic footbed, the Amphibian boots are perfect for shore and boat diving. Size chart Add to cart
En Stock -30% Available Drysuit underwear Fourth Element Arctic Leggings, Men 101.24 € 144.63 € HIGH PERFORMANCE UNDERSUIT Warm, low bulk, low buoyancy thermal undersuit for drysuits that works even when wet. Available as a full one-piece suit or two-piece, the Arctic is designed to be used as part of a layering system under a trilaminate drysuit. SIZE CHART Add to cart