Fuera de Stock Out-of-Stock inicio 2nd stage Elbow J.Dive-elbow1 59.99 € Very high quality swivel elbow made of steel, to be mounted on the inlet hose of the 2nd stage of the regulator. Standard connections 9/16" male-female View
Fuera de Stock -20% Out-of-Stock REGULATOR ACCESORIES 2nd Stage Elbow Swivel J.Dive-elbow4 35.60 € 44.50 € Second Stage Elbow Swivel9/16" - 18 male to 9/16" FemaleCaptured O Rings for safer swivel View
En Stock Available J.Dive Systems Aluminium single tank adapter STA 35.01 € Adapter for Single Tank in Alu-minium Measures: 33cm x 8,8cm Weight: more or less, 210gr. Add to cart
Fuera de Stock New Ask us about availability BACKUP/HAND LIGHTS Artek Dolphin MK3 154.90 € The diving light Dolphin MK3 is the smaller option of the ARTEK family.It has 600 lumen power output and a very high light penetration during immersion. It reaches the ipressive quantity of 31000 lux at 1 meter. Two options available: Option 1: Only the dive light, transport bag and extra O-Ring as spare part.Option 2: All the above items + batterie and... Add to cart
Fuera de Stock New Ask us about availability Artek Artek Kraken ARKR01 369.90 € New demands from users increasingly point to powerful spotlights with decent burn times but dispensing with the typical battery system with umbilical. The Artek Kraken was born from that need, designed with the power of the MEGALODON but without the external battery pack connected by umbilical. The result, a very powerful focus with more than decent... Add to cart
Fuera de Stock New Ask us about availability Artek Artek Kraken with Goodman Handle (set) ARKR01S 429.90 € New demands from users increasingly point to powerful spotlights with decent burn times but dispensing with the typical battery system with umbilical. The Artek Kraken was born from that need, designed with the power of the MEGALODON but without the external battery pack connected by umbilical. The result, a very powerful focus with more than decent... Add to cart
Fuera de Stock Ask us about availability Artek Artek® Barracuda 221.90 € The new Artek Barracuda comes to replace the old Orca and Tigershark, counting this new model with more power and a smaller diameter head. Light power: 1300 lumens Material: 7075 Aluminum Alloy. Aircraft Grade Finish: HAIII hard anodized, Mil-STD 8625 standard LED type: Cree XM-L2 led diode. Cold light (min 6500K) Autonomy: On the surface 90 minutes... Add to cart
Fuera de Stock Ask us about availability Artek Artek® Megalodon Mk2 545.00 € The primary light Megalodon mk2 is the evolution of the ARTEK®’s flagship. It has been designed to deliver 1280 lumens of light output with higher light penetration during immersion. The small size of the battery canister is impressive. New features to increase security to this high-end unit. Access to the complete technical specifications Add to cart
Fuera de Stock New Out-of-Stock STEEL HARDWARE Belt stop serrated Stainless Steel 316L 80125 1.57 € Serrated stainless-steel stopper for 50 mm (2") strap. View
En Stock Last items in stock inicio Breathing hoses ballast (pair) (pre owned) Jdive00BH 59.99 € Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could... Add to cart
En Stock Available BUNGEE MOUNTS/COMPASS BUNGEE in 4, 5, 6 and 8mm 1.36 € Price per meter Add to cart
En Stock Available inicio Canister fixing system jdive0032 21.90 € The system is provided with a strap with a stainless steel eyelet and screws to attach it to the backplate and the additional stainless steel buckle. Add to cart
En Stock Available Accesories / Weight Cobra weight Belt jdive0025 29.00 € Ballast belt mounted with the Cobra GT closure of Scuba Force and a soft strap to be able to mount and disassemble the leads in seconds and also be able to easily tighten and loosen the belt. NOTE: the leads are not included Add to cart
En Stock Available J.Dive Flex HQ copy of J.Dive Flex HQ hose, LP Regulator Orange 17.64 € J.Dive Flex HQ regulator hoses We incorporate this new braid which offers better qualities in terms of elasticity.The J.Dive Flex hoses are assembled in our facilities following the most stringent quality controls. When assembling them ourselves, we are able offering hoses to any size you need, being able to select the measure that is really... Add to cart
En Stock Available CHARGERS/BATTERIES Doble charger for 18650 Li-ion batteries 2x1850-charge 12.50 € Add to cart
Fuera de Stock Out-of-Stock REGULATOR ACCESORIES Elbow 3/8" J.Dive-elbow2 29.99 € Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º View
En Stock Last items in stock REGULATOR ACCESORIES Extender for 3/8" connections 19.99 € 3/8" connection extender in two length options, 16 and 24mm (not counting the thread) Standard 3/8" connections. NOTE: the photo shows the 2 length options. The price includes only one unit. Add to cart
En Stock Available Computers Spare parts HP Hose for wireless transmiter jdivehptrans 25.00 € HP phose with nipple included for Suunto, Mares, Aqualung and Shearwater wireless transmitters The use of the nipple (included together with the hose.) is essential for its correct operation NOTE: It is recommended not to manipulate high pressure equipment if you do not have minimal knowledge. Contact us if you have any questions about it for a correct... Add to cart
En Stock Available Tools and grease Inflator valve tool (medium model) jdive0026 3.99 € This product is a tool for the removal and adjustment of the schrader valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing. This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.Total tool length: 90mmHandle Length: 65mm Add to cart
En Stock Available TANK LABELS J.Dive "DILUENT" Tank label j.divedil 2.99 € Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm Add to cart
En Stock Available TANK LABELS J.Dive "OXYGEN" tank label j.diveoxy 2.99 € Identification Oxygen Sticker for rebreather tanks, with high adhesion power. Dimensions: 184mm x 34mm Add to cart